Universal Admixture for Precast and Ready-Mix Concrete
Effective in the temperature range from -5 °C to +35 °C, ensuring high early strength of concrete, improving the quality of construction works and accelerating the pace of building.
Purpose:
Used in the production of cement-based concrete and mortar mixtures, including industrial floors and heated floors, as a superplasticizer and hardening accelerator.
Application:
Mix before use. Add to the concrete (mortar) mix together with the mixing water.
Dosage:
The admixture should be dosed for cement systems, concretes, and mortars in the form of the ready-to-use aqueous concentrate supplied in its original container, in the following amounts:
- For direct concrete freezing: 1.2% by binder mass;
- For precast reinforced concrete: 0.65% by binder mass;
- For ready-mix concrete in the cold season with subsequent curing: 0.8% by binder mass.
The optimum dosage should be determined in the laboratory for each specific technological case.
For mechanical dosing, it is recommended to add together with the mixing water through the water dispenser. Pre-mixing with water does not reduce admixture performance but requires consideration of consumption after dilution.
Recommendations:
The dosing container must be clean and provide accurate volume measurement.
Safety Instructions:
Avoid ingestion or contact with food. In case of eye or skin contact, rinse thoroughly with water.