Superplasticizer admixture with a hydrophobic effect for concrete. Increases water resistance (up to W12), frost resistance (up to F300), flexural and tensile strength; reduces water absorption and efflorescence; ensures concrete resistance to salts and saline solutions, as well as to the negative effects of CO₂ and other emissions.
Purpose:
Used for the production of ready-mix, precast concrete and reinforced concrete, industrial floors, road concrete (including highways), hydraulic concrete, and hydraulic structures.
Application:
Introduce into the concrete (or mortar) mix as a component together with mixing water. Stir before use. The dosage amount is calculated according to the recommendations below. Concreting or use of mortar is then carried out in the usual technological manner.
Dosage:
The admixture should be dosed for cement systems, concrete, and mortar in the form of a ready-to-use aqueous concentrate, as supplied, in the following quantities:
- For standard concrete: from 0.8% by weight of binder
- For road concrete: from 1% by weight of binder
- For hydraulic concrete: from 1.5% by weight of binder
- For achieving a dry concrete surface: from 2% by weight of binder
- For chemical-resistant concrete: from 3% by weight of binder
- For self-compacting concrete: from 1.5% by weight of binder
The optimal dosage should be determined in the laboratory for each specific technological case.
For mechanical dosing, add together with mixing water through a water dispenser. Pre-mixing with water does not reduce admixture quality but must be taken into account when calculating the total amount after dilution.
Recommendations:
The dosing container must be clean and have an accurately fixed dosing volume.
Safety instructions:
Avoid ingestion or contact with food. In case of contact with eyes or skin, rinse thoroughly with water.