Polycarboxylate-based superplasticizer for concrete pumping, production of SUB and SCC concretes, concreting of densely reinforced and complex-shaped structures, high-strength and ultra-high-strength concretes, and industrial floors.
Purpose:
Used for the preparation of cement-based concrete and mortar mixes. It improves flowability, controls the retention of plasticity, and increases both early and ultimate strength of concrete.
Application:
Used as a superplasticizer for the production of self-compacting concrete (SCC/SUB effect). Suitable for concreting at temperatures up to +30 °C with subsequent proper curing.
Dosage:
The admixture should be dosed as a ready-to-use aqueous concentrate in the amount indicated below:
- For flowing concretes: from 1% by weight of binder
- For self-compacting concretes: from 2.5% by weight of binder
- For ultra-high-strength concretes: from 3% by weight of binder
- For architectural concretes: from 3% by weight of binder
The optimal dosage should be determined in the laboratory for each specific technological case.
When using mechanical dosing, it is best to add the admixture together with the mixing water through a water dispenser. Pre-mixing with water does not impair the quality of the admixture, but the admixture content must be adjusted after dilution.
Recommendations:
The dosing container must be clean and have an accurately fixed dosing volume.
Safety instructions:
Avoid ingestion or contact with food. In case of contact with eyes or skin, rinse thoroughly with water.